GBP
  • TRY
  • USD
  • EUR
  • GBP
+90 444 1 726
Filters

Heating Thermostat , Elektra ETO2

Electric Heating . Frost Protection ELEKTRA  168

 

ELEKTRA ETV

DIN bus installation. Temperature controller with temperature sensor. Compact dimensions (2 modules). LED on for system operation.

Heating Thermostat , Elektra ETO2 2 ELEKTRA ETV-1991 thermostat

ELEKTRA ETN4

DIN bus installation. Temperature controller supporting two temperature sensors, including a limiting one. Large backlit display presents the operating parameters of the controller. Adjustable hysteresis allows to define precision of the temperature measurements. Equipped with the on/off switch.

 

Heating Thermostat , Elektra ETO2 3 ELEKTRA ETN4-1999 thermostat

ELEKTRA ETI

DIN bus installation.. Temperature controller with temperature sensor. Adjustable hysteresis allowing to assess in detail temperature measurement precision. Compact dimensions (2 modules). LED on for system operation. In special cases (greasy pipes or temporary in-pipe temperature exceeding +70°C e.g. while flushing or washing),

Heating Thermostat , Elektra ETO2 4

ELEKTRA ETI-1544 thermostat

ELEKTRA ETI-1522 temperature controller is recommended, which features especially designed sensor with safe operation temperature range from -40°C to +120°C.

Heating Thermostat , Elektra ETO2 5 ELEKTRA ETI-1522 thermostat ((temperature sensor with installation opening)

UTR 60-PRO

Switchboard mounting. Temperature controller especially designed for ELEKTRA SelfTec PRO self-regulating cable pipe heating systems. Features temperature sensor for on-pipe installation, with safe operation temperature range for -40°C to +120°C. Adjustable hysteresis allowing to assess in detail temperature measurement precision. LEDs on for system operation.

Heating Thermostat , Elektra ETO2 6 ELEKTRA UTR 60-1544 thermostat 

 

Heating Thermostat , Elektra ETO2 7

Istıma Thermostat , Elektra ETO2 

 

Power supply 120/230 V ~ 50/60 Hz
Built-in transformer 24VAC, 6VA
Max. load 3x16A, 230 V ~ 50/60 Hz (potential free relays)
Installation DIN-rail or surface mounting
Temperature range 0°C ÷ +5°C
Difference/Hysteresis 0.3K Controller cover protection (surface mounting) IP 21
Work signalization LED
Temperature sensor calibration potentiometer
Dimensions (H x W x D) 90 x 156 x 45 mm
Modules 9

 

Electric Heating . Frost Protection ELEKTRA  169`

 

Ground temperature and moisture sensor
ETOG-56T and an installation tube ETOK-T

 

(for soil, concrete flagstones,
paving cobbles), used for heating
control of drives,
traffic routes,
etc.

Electric Heating . Frost Protection ELEKTRA  170

ELEKTRA ETO2 controller
(max. load up to 3 x 16 A), suitable for servicing
one or two zones:
two different roof and gutter zones or
two outdoor areas (e.g. drive and stairs).

Electric Heating . Frost Protection ELEKTRA  171
 

 

Moisture sensor ETOR-55

(for gutter bottom
installation) used for
heating control of roofs
and gutters.


Electric Heating . Frost Protection ELEKTRA  172

Air temperature
sensor ETF-744


(for outdoor installation) and

Electric Heating . Frost Protection ELEKTRA  173

 

Electric Heating . Frost Protection ELEKTRA  174

 

Electric Heating . Frost Protection ELEKTRA  175

FileInfo
Yerden Isıtma [PDF, 959.26 KB]
Donmaya Karşı Koruma [PDF, 2.12 MB]
Kar ve Buza Karşı koruma [PDF, 2.88 MB]
Floor_Heating [PDF, 1.26 MB]
ETOG2 Datasheet [PDF, 70.69 KB]
ETOR2 Datasheet [PDF, 100.21 KB]
 Google Plus - Samm Technology  Youtube - Samm Technology  Facebook - Samm Technology  Twitter - Samm Technology  Facebook - Samm Technology
Scroll To Top