IP-SM Custom design silicone heating mat Isopad
Isopad IP-SM silicone heating mats
for industrial use are selected where excellent flexibility and high temperature resistance in thermal processes are needed. this product is typically same of IP-DASI but with the option of Panels customized to your specification are designed with various options on insulated and metal backings, fixings, cutouts, and controllers. We will advise on the best options for your needs, and as each is different we supply a new technical specification.
Code: IP-SM
Area Specifications
-
Area classification: Nonhazardous, ordinary area
-
Ingress protection: IP65 (max. IP67)
- Electrical protection class: Class II (see note)
- Storage temperature: –20 to +40°C
- Minimum installation temperature: –45°C
Note: Electrical protection class I with metal sheath
Standard Manufacturing Sizes
- Length: 2000 mm (other sizes on request)
- Tolerances: <400 mm (±2.5) / >400 mm (±4.0) (special sizes excluded)
- Width: 900 mm (other sizes on request)
- Tolerances: <400 mm (±2.5) / >400 mm (±4.0) (special sizes excluded)
- Thickness: 2.0 to 4.5 mm (other sizes on request)
- Tolerances: ±0.5 mm (special sizes excluded
Heater Construction
- Type: Resistance heating cable
- Material: Various alloys
- Material insulation: Silicone
- Carrier: Silicone or silicone-glass-silk mat
- Thermal insulation: On request, e.g. silicone foam mats
- Outer protection type: On request, e.g. stainless steel or aluminium sheet metal
- Fixation and closure type: Diverse methods according to application, e.g. adhesive foil, holes, hooks, eyelets, velcro tape,etc.
General: on request the heating mats can be manufactured with 2-dimensional contours and cut-outs or can be pre-formed for special
applications.
Lead Connection
Connection lead length, lead cross section, maximum operating temperature and connection lead material depend on design
Temperature Control
- Sensor type PT100, Fe-CuNi/J or NiCr-Ni/K according to DIN IEC
Sensor lead length, lead cross section, maximum operating temperature and sensor lead material depend on design
Technical data
- Frequency: 50-60 Hz
- Maximum operating voltage: 480 Vac (~1ph/~3ph)
- Nominal power: ±10% depending on design
- Minimum installation resistance: 100 MΩ
- Maximum operating temperature: 200°C (150°C for versions with adhesive foil)
Minimum bend radius, maximum area load and maximum compression strength depend on design
File | Info |
---|---|
![]() | [PDF, 89.66 KB] |