• TRY
  • EUR
+90 444 1 726




STOPAQ 2100 AQUASTOP - Anti-Corrosion Water Sealing

As a non-toxic, single material, flexible, water and gas tight sealing synthetic compound, STOPAQ 2100 AQUASTOP is applied on dry and wet surfaces of concrete, brick, PVC and others. No primer materials required, does not become 100 solid but rather stays permanently flixable. Stopaq 2100 Aquastop is a compound suited for fixing of pipe- or cable wall inlets and hollow spaces against penetration of gases, moisture, standing water and running ground water leaks. The compound does not develop stress and extends when water is present. Stopaq 2100 Aquastop compound must be secured with a layer of water resistant- or fire retarding mortar.

Stopaq 2100 AQUASTOP Features:

  • Minor surface preparation required
  • Adheres on wet and dry surfaces
  • Fast and easy to application
  • Remains flexible and has no pot-life
  • Resists up to 0.3 bar of ground water pressure
  • Impermeable to water and gas
  • Non Toxic - applicator- and environment friendly
  • Does not age

Stopaq 2100 AQUASTOP Benefits:

  • The sealing remains flexible permanently
  • Does not demand special tools for application
  • No material waste – paste is re-usable
  • Immediate sealing - no curing time
  • Provides permanent and optimal safety
  • No fumes, no chemical reactions
  • Adjusts to movements of pipes & cables
  • Allows adding and removing of conduits at any time

Application examples:

Wall Inlets below ground water level

Stopaq 2100 Aquastop is suited for sealing against ground- and surface water ingress around pipes and cables, leading through wall inlets into basements.

Sealing of running water leaks

Stopaq 2100 Aquastop is used for permanent stopping of running ground- or surface-water leaks through cable- and pipe wall penetrations.

Wall penetrations inside buildings

s: Permanent sealing and protection of wall penetrations against gas, fire or flooding is obtained with the Stopaq 2100 Aquastop, encapsulated by a fire retarding- or water resistant mortar top barrier on each side of the seal

Multi pipe- & cable inlets

Stopaq 2100 Aquastop is perfectly suited for hermetic sealing of horizontal multiple pipe or cable wall inlets.

Stopaq 2100 Aquastop Details

Colour Green 
Density 1.35 ± 0.05 g/cm³ (NEN 1833)
Water absorption 5% - 20% (ASTM D 570)
Temperature Ranges  Application (ambient): +5°C to +35°C Service: -20°C to +35°C
Dimension criteria
  • Between cable/pipe and wall min.10 mm and max. 40 mm
  • Depth of wall inlet min. 150 mm

Stopaq 2100 Aquastop is compatible with the following materials:

  • Bare metal pipes like carbon steel, stainless steel, galvanized steel, copper, etc. Additional anti-corrosion coating with e.g. Stopaq® Wrappingband is recommended in case of carbon steel pipes.
  • Pipe coatings like polyethylene (PE), polypropylene (PP) and liquid coatings like epoxies, etc.
  • Polymeric pipes like polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC, etc.
  • Electrical cable insulating materials like polyethylene (PE), polyvinylchloride (PVC). For compatibility with rubber insulating materials please consult Stopaq b.v.

Application photos of STOPAQ 2100 AQUASTOP -1 Application photos of STOPAQ 2100 AQUASTOP -2 Application photos of STOPAQ 2100 AQUASTOP -3 Application photos of STOPAQ 2100 AQUASTOP -4 Application photos of STOPAQ 2100 AQUASTOP -5

 Google Plus - Samm Technology  Youtube - Samm Technology  Facebook - Samm Technology  Twitter - Samm Technology  Facebook - Samm Technology
Scroll To Top