Filters

FITEL S123C V2 Fusion Splice Kit +S326A Cleaver

Fusion Splicer S123C-A + S326A Cleaver

Simple operation with Fixed V-Groove
Rugged and compact hand-held design to endure any kind of environmental conditions
Internal battery charging
Fast splice (13sec) at super low loss and fast heating(25sec)
70 cycles (Splicing & heating) with two batteries
Available for All METRO/LAN/FTTx fibers including ultra bend-insensitive fibers(G657)
Applicable for Splice-On-Connector(SOC)
Includes S712 Common Holder for both 250 and 900 μm
Cooling Tray CTX-01
Car Charger CDC-01

Brand:Fitel Fusion Splicers

Price excl. VAT:$0.00 + KDV

Price inc. VAT:$0.00

Alignment Type:	Fixed V-Groove (Clad Alignment)
Fiber Count:	Single Fiber
Cladding Diameter:	125 μm
Coating Diameter:	Single: 250 - 900 μm Ribbon: 280 - 400 μm
Fusion time:	13 seconds

Can be ordered by Email

Code: MT01104

Request This Product	Rate this product
Add to wishlist	Compare

Rugged and compact hand-held design to endure any kind of environmental conditions
Internal battery charging
Fast splice (13sec) at low loss and fast heating (25sec)
70 cycles (Splicing & heating)
Available for All METRO/LAN/FTTx fibers including ultra bend-insensitive fibers(G657)
Applicable for Splice-On-Connector(SOC)

Features and Applications

With its low profile design and light weight body the S123C offers single fiber splicing with outstanding mobility and extreme ease-of-use. In addition, the rugged body is designed to endure harsh operating conditions by improving shock/impact resistance with rubber pads embedded on 4 corners of the splicer body. It achieves water resistance compliant IPX2 and dust resistance compliant IP5X.
The fast 13 seconds splice time and 25 seconds protection sleeve shrink time offers a highly efficient work environment. Large battery capacity makes it possible to perform 70 cycles of splicing and heating, while it offers SOC solution as well.
By combining portability, ease of use, improved speed and durability, the S123C becomes an excellent option for use in the conventional telecommunications industry.

How is Fiber Optic Splicing done?

Fusion splicing is using localized heat to melt or fuse the ends of two optical fibers and connect them with each other. The splicing begins by getting each fiber end ready to be fused.

Fiber Stripping before Splicing

The protective coating made of polymer surrounding the optical fiber has to be removed in order for it to be ready for fusion splicing. When both fiber ends for fusion are ready the splicing can be started, each fiber should first lose its protective coating. Using a fiber stripper, all that can be done easily.

Fiber ends cleaning

Any dust or particles on the end of the optic fiber can affect the light signal or even block it. After the two ends are fused together through the splicing process, no dust or anything, not even air, should be inside the linking point.

Fiber optic Cleaving

Cleaving means cutting the edges of the fiber ends in order to ensure that each in 90° degree to fiber; when the two end meet they should be perfectly flat and touching each other completely.

Actual Fiber Splicing Step

Just put the two fiber ends into the splicer and start the fusion when they are in complete contact, then the machine runs a test to ensure the splice will survive long time usage and that the light loss at the splice is at minimum. The best result should be 00.00 dB, which means the splicing was perfect.

Alignment Type:	Fixed V-Groove (Clad Alignment)
Applicable Fiber:	SM / MM / DSF / NZD / BIF / UBIF
Fiber Count:	Single Fiber
Cladding Diameter:	125 μm
Coating Diameter:	Single: 250 - 900 μm Ribbon: 280 - 400 μm
Fusion time:	13 seconds
Cleave Length:	5-10 mm

	Soft Case FITEL Price excl. VAT:$0.00 Price inc. VAT:$0.00 Out of stock
	Common Fiber Holder 250/900μm Price excl. VAT:$0.00 Price inc. VAT:$0.00 Quantity:
	S943 Battery for S178/153/123 Price excl. VAT:$0.00 Price inc. VAT:$0.00 Quantity:
	Spare Electrodes for S178 Price excl. VAT:$0.00 Price inc. VAT:$0.00 Quantity:
	Electrode Sharpener Fitel electrode sharpener, cleans and maintains the precise tip for quality splicing, typical Fitel electrode life is 5000 splices with a clean every 1000 with this sharpener. Price excl. VAT:$0.00 Price inc. VAT:$0.00 Quantity:
	AC Adaptor for S178 AC Adaptor for S178 Price excl. VAT:$0.00 Price inc. VAT:$0.00 Out of stock
	S326A High Precision Optical Fiber Cleaver S326A High Precision Optical Fiber Cleaver With its ergonomic and light weight design, the S326A cleaver offers the operator the versatility to cleave on a work bench or in the palm of their hand. The reduced lid size and wide opening angle facilitates fiber loading and improves stability resulting in better single and ribbon fiber cleaves. Just pressing the lever completes the fiber cleave and automatically collects the waste. With 24 positions, the long life-time blade achieves 48,000 fiber cleaves. Price excl. VAT:$0.00 Price inc. VAT:$0.00 Quantity:
	V-Groove Cleaning Brush V-Groove Cleaning Brush V-Groove Cleaning Brush, suits ribbon and single fiber cladding alignment vee groove blocks. Price excl. VAT:$0.00 Price inc. VAT:$0.00 Quantity:

File	Info
S123C_FITEL_Handheld_Fusion_Splicer_Datasheet	[PDF, 2.47 MB]

New Products

Bestsellers

Main Brands

All

Telecommunications

Heating Syetems

Energy

Leak Detection Systems

Corrosion Prevention

Data Center