• TRY
  • USD
  • EUR
  • GBP
+90 444 1 726

XPI-NH Polymer insulated heating cable

XPI-NH is a polymer insulated (PI) series heating cable, for use in non-hazardous areas. It has been designed for use in freeze protection and temperature maintenance applications of pipes, tanks and other equipment. XPI-NH offers an economical solution for a wide variety of heat-tracing applications in non-hazardous areas, in particular for pipe lengths beyond the maximum circuit lengths of parallel heating cables.


The selection of PTFE for the inner and outer insulation makes XPI-NH a safe and reliable product. It provides highest chemical withstand and good mechanical strength, in particular at elevated temperatures.


XPI-NH heating cables can be used for temperatures up to 260°C. The heating cable is easy to install and has printed meter-marks. Pentair Thermal Management offers XPI-NH heating cables in a very wide range of resistances, starting from 0.8 Ω/km up to 8000 Ω/km as well as a complete range of components for connection and splicing of the cables.



Technical data:

  • Max. exposure temperature:  260°C (power off, continuous)
  • Min. installation temperature:  –60°C
  • Min. bend radius: 2.5 x cable diameter at –25°C  /  6 x cable diameter at –60°C
  • Min. clearance: 20 mm between heating cables
  • Max. power output: 25 W/m (typical value, depending on application)
  • Nominal voltage: Up to 300/500 Vac (U0/U)

 Google Plus - Samm Technology  Twitter - Samm Technology  Youtube - Samm Technology  Facebook - Samm Technology

Scroll To Top