TraceTek TT5001HS Solvent Sensing Cable for Underground Leak Detection
The TraceTek TT5001-HS is a solvent sensing cable that is designed to detect and locate organic solvents. The TT5001-HS cable is designed for use within slotted PVC conduit and is constructed with an outer layer of polyethylene fibers to provide extra pulling strength and low friction during the installation process.
TraceTek TT5001-HS sensing cable detects the presence of liquid organic solvents at any point along its length, yet it does not react to the presence of water. Installed with a TraceTek Sensor Interface Module and TraceTek Alarm Panel, the cable senses solvent liquid, triggers an alarm and pinpoints the location of the leak within one meter.
Designed for underground leak detection
TT5001-HS sensing cable is designed for use within slotted PVC conduit and is constructed with an outer layer of polyethylene fibers to provide extra pulling strength and low friction during the installation process. The sensor cable core is standard TT5001 with well documented response
times, and years of successful applications. The cable can be purchased in bulk form, cut to length in the field and joined using connector kits, or it can be obtained in custom cut lengths with connectors attached in the factory. The cable is designed to pull through 42 mm or 1-½ in slotted schedule 80 PVC conduit with up to 240 m (800 ft) between pull boxes.
Distinctive appearance and ready for pipeline projects
TT5001-HS sensing cable has a glossy white outer layer of rope fibers, marked with a distinctive purple tracer. The polyethylene rope outer layer is fabricated with a number of individual filaments that collectively increase the pulling force limit to greater than 100 kg (220 lb). At the same time, the outer rope layer dramatically reduces frictional drag between the cable and the PVC conduit, thereby facilitating long distances between pull boxes. In many cases four lengths of TT5001-HS will be joined to form a single TraceTek circuit of 1000 meters.Multiple circuits can be monitored from a single location, thus permitting pipeline applications from a few hundred meters to many kilometers.
TraceTek uses radiation cross-linking and conductivepolymer technology to make TT5001-HS cables. The combination of water and chemically resistant inner wall coupled with the enhanced strength of the polyethylene outer rope layer yield a product well suited for underground leak detection. The cable is able to withstand both the rigors of installation and long years of service underground with exposure to ground water and various soil conditions. Mildly acidic or alkaline conditions, exposure to detergents and similar tough conditions are well tolerated.
|TraceTekTT5001HS-DataSheet||[PDF, 2.72 MB]|