GBP
  • TRY
  • USD
  • EUR
  • GBP
+90 444 1 726
Filters

Self-Regulating Heating Cable BSX Thermon

Self-Regulating Heating Cable   BSX

Self-Regulating Heating Cable   BSX

 

 

 
BSX self-regulating heating cables

BSX self-regulating heating cables are designed to provide freeze protection or process temperature maintenance to metallic and nonmetallic piping, tanks and equipment. The heat output of BSX cable varies in response to the surrounding conditions along the entire length of a circuit. Whenever the heat loss of the insulated pipe, tank or equipment increases (as ambient temperature drops), the heat output of the cable increases. Conversely, when the heat loss decreases (as the ambient temperature rises or product flows), the cable reacts by reducing its heat output. This self-regulating feature allows BSX to be overlapped without temperature upset damage to the cable. BSX cables are certified for use in ordinary (nonclassified) areas and in potentially explosive atmospheres in accordance with the ATEX Directive and the IECEx Scheme.2

 

 

Available watt densities  3, 5, 8, 10 w/ft @ 50°F
  (10, 16, 26, 33 w/m @ 10°C)
Supply voltages 110-120 or 208-277 Vac
Max. maintenance temperature 150°F (65°C)
Max. continuous exposure temperature  
Power-off 185°F (85°C)
Minimum installation temperature  -60°F (-51°C)
Minimum bend radius  
@ 5°F (-15°C) 0.38” (10mm)
@ -76°F (-60°C) 1.25” (32 mm)
T-rating 1  
3, 5, 8 w/ft (10, 16, 26 W/m) T6 185°F (85°C)
10 w/ft (33 W/m) T5 212°F (100°C

 

CONSTRUCTION
1 Nickel-plated copper bus wires (16 AWG)
2 Radiation cross-linked semiconductive heating matrix
3 Radiation cross-linked dielectric insulation
4 Tinned copper braid
5 Polyolefin overjacket provides additional protection for
cable and braid where exposure to aqueous inorganic
chemicals is expected.
OPTIONS
6 FOJ Fluoropolymer overjacket over tinned copper braid
provides additional protection to cable and braid where
exposure to organic chemicals or corrosives is expected.
BASIC ACCESSORIES
Thermon offers system accessories designed specifically
for rapid, trouble-free installation of Thermon heating
cables.
All cables require a connection kit to comply with approval
requirements. Information on accessories to complete
a heater circuit installation can be found in the “Heating
Cable Systems Accessories” product specification sheet
(Form TEP0010).

 

 

Self-Regulating Heating Cable   BSX

FileInfo
TEP0067U [PDF, 288.89 KB]
BSX-data-sheet [PDF, 263.52 KB]
 Google Plus - Samm Technology  Youtube - Samm Technology  Facebook - Samm Technology  Twitter - Samm Technology  Facebook - Samm Technology
Scroll To Top